How We Work

Brief to
Installation

Three stages, one facility, total control. Every panel is designed, cast, and finished in-house at our Sakarya workshop — from your first sketch to a specification-ready, installed surface.

3D model of a scroll ornament on a grid, beside the cream relief panel of the same motif
01
Step 01 — Design & Modelling

From Brief to
Digital Model

We translate your spatial intent — pattern language, depth, geometry — into parametric constraints using our digital modelling pipeline. The design brief becomes a high-fidelity 3D surface model. Iteration is fast and non-destructive — changes at this stage cost nothing. BIM-ready outputs included as standard.

Non-destructive digital iteration — zero physical prototyping waste

Cream panel with fine vertical fluting and four sphere forms, soft studio light
02
Step 02 — Moulding & Casting

3D-Printed Moulds.
Precision Casting.

Master moulds are 3D-printed directly from the digital model, then replicated in silicone or elastomer for unlimited production runs. Lumina PMAG™ and PUCOMP™ panels are cast vertically under controlled conditions — each batch tested for compressive strength and surface integrity before release.

Reusable production moulds — one master serves the full production run

Cream relief panel of four petal-shaped forms meeting at the centre, soft studio light
03
Step 03 — Finishing & Delivery

Artisan Finish.
Ready for Installation.

Every panel receives a precision surface finish — any RAL or custom colour, with textured options available. The result is a micro-smooth surface resistant to humidity, UV, and impact. Each panel ships with a material data sheet, installation drawing, and BIM file.

Spot-repairable without full panel replacement — extended service life

Tall charcoal textured wall panel in a lounge, lit by ceiling spotlights
Manufacturing HQ

Made in
Sakarya

Our facility in Sakarya houses the full production pipeline under one roof — from additive mould-making through casting to finishing and QA. Vertical integration eliminates sub-contractor delays and gives us total quality control from brief to crate.

Every panel ships with a material data sheet and installation drawing. Logistics and on-site installation support available to the Middle East, Caucasus, and Eastern Europe.

Sakarya · Türkiye
Lounge wall of cream cubic relief modules, curved sofas and warm cove light

In the Workshop

Every panel passes through the same sequence of hands.

Release agent brushed onto a white silicone mould before casting
01 The mould is prepared before every cast.
Hands levelling the poured PMAG surface in a silicone mould on the workbench
02 The cast is poured and left to cure.
A cast relief panel lifted from its white silicone mould, the negative form visible beneath
03 The mould opens. The panel appears.
Cast relief panels standing beside their silicone mould: positive and negative form
04 Negative and positive — two faces of every design.
Hand sanding the surface of a cast relief panel on the workbench
05 Final refinement before the panel leaves the studio.

Ready to Specify
Your Project?

Share your brief with our team. We'll return a material recommendation, panel sketch, and indicative timeline within 5 working days.

Or look through the Concept Work, or review Materials & Specs.

Initiate Project